Posts by tag: Low Miles

Warning!

We have 15 years of archives. Please note that posts over a year old may have been updated to point to similar bikes available to bid on eBay.
Honda February 22, 2020 posted by

Featured Listing: 1979 Honda CBX

Update 6.18.2020: This bike is SOLD! Congratulations to buyer and seller! -dc

What’s cooler than a steel-framed classic motorcycle powered by an air-cooled inline six? In the literal sense, almost anything, as no matter how many fins you cast into the block, six 166-cc pistons slamming up and down at 9,000 rpm produce rather a lot of heat. In the figurative sense, though, damn near nothing comes anywhere close.

1979 Honda CBX for sale on eBay

The Honda CBX only lasted from 1978 to 1982, but when it bowed in ’78 it was the fastest production bike there was, and reviewers raved about how much better it went than the next-best CB900F. One reviewer said that even though the CBX was more expensive, it represented the better bargain as the dynamics were good enough to outweigh the cost difference. With 105 horsepower from the big six and a 140-mph top end, the numbers were absolutely eye watering, at a time when 80 horsepower was considered just fine. Even with a 600lb wet weight — gargantuan by today’s values, and unthinkable for anything sporting — the bike wasn’t that much heavier than its four-cylinder competition.

This 1979 Honda CBX is in better-than-showroom condition, having only covered 9,000 miles over the last 41 years. It has been owned by a Honda dealer, and two fastidious owners in the last 20 years, who kept it immaculately clean. The seller went through it thoroughly, but says he only refinished a few small parts. The gorgeous shine you see everywhere else is factory original.

From the eBay listing:

1979CBX: As close to new as possible with no “patina”. The original owner was a Honda Dealership owner. The owner passed away after putting 8,533 miles on it in 5 years. It took 20 years for his estate to be settled and the bike was auctioned in 2005. The second owner had it for 15 years (mostly sat in his living room) and put about 500 miles on it before selling it to me in July 2019.

I disassembled the bike and performed the following: Replaced the wheel bearings and seals, replaced the steering head bearings and dust seals, rebuilt the brake calipers and master cylinders using all Honda NOS parts. Replaced all of the brake lines with Spiegler stainless steel lines. Replaced the 630 drive chain with Honda NOS chain (continuous with no mater link) in a sealed bag with instructions and a new chain wear decal. Replaced the tires with Avon Roadriders. Replaced the shocks with Hagon adjustables. Rebuilt the forks with Honda NOS seals, o’rings and Race-Tech springs. The carburetors were restored by Old School Carbs. Replaced the fuel petcock with Honda NOS assembly.

There were only four parts that I refinished-side stand, center stand, brake master cylinder and battery side bracket. The only part that I re-chromed was the rear axle nut. The front fender, fuel tank, tailpiece, side covers and chain guard are original. The seat is original. All of the electrics except the battery are original.

Included is the original operator’s manual velcro’d to the right side cover. Also the complete original tool kit is in its bag next to the battery box.

I had planned to ride the bike after I completed my work. I have changed my mind as it is too nice for me to risk it. Please call if you have any questions or need pictures of specific areas. Paul 314-600-0197

As the specter of inline six motorcycles fades further into history, bikes like the CBX are moving up in the world with collectors. Apart from the alarming speeds they can achieve, they sound like a Formula 1 car at full chat, and cut a wide swath in person. Finding one even close to this nice is going to be increasingly hard.

Featured Listing: 1979 Honda CBX
Kawasaki February 20, 2020 posted by

Featured Listing: 1983 Kawasaki KZ1000R Eddie Lawson Replica

This Featured Listing is part of the The Bob Benyo Collection. Thank you for supporting the site, Bob! -dc

This 1983 Kawasaki KZ1000R Eddie Lawson Replica makes as much of a statement today as it did when it rolled out of Minato City 37 years ago. In ‘83, the bikes announced what those who followed AMA Superbike racing already knew: That Japanese bikes were about to take over road racing for good, with the help of a brave, skinny Californian kid named Eddie Lawson. Today, this bike’s impeccable, unrestored condition sets it apart.

1983 Kawasaki KZ1000R ELR for sale one eBay

With Steady Eddie aboard, the KZ1000Rs stormed to the AMA Superbike title in 1981 and 1982, and the ‘83 ELR looked like it was an eyelash from the bike that did the deed.

The bikini fairing, boxy tank, deep-dished seat and ducktail rear cowl were lifted right from the 1982 GPz1100, but the unmistakable lime green and electric blue livery were all racebike. Gold wheels finished off the look, and a Kerker pipe and reservoir shocks meant it sounded fierce and handled its weight and power with aplomb. 

This one has fewer than 1,800 miles on the clock, and has had a minor refresh but is otherwise as it was purchased. The clutch is new, the carbs have been freshly cleaned and painted, and couple cosmetic pieces were swapped out for NOS parts. Otherwise, it’s all original. As a bonus, it will be supplied with a set of NOS bodywork, from the fenders to the tank.

From the eBay listing

1983 Kawasaki kz1000r Eddie Lawson superbike replica near perfect all original! Multiple award winning with all “NOS” body parts coming out of my private collection.

Multiple award winner just won 1st place best original Japanese bike. The judges from the pebble beach event were blown away at how perfect she was.

This bike underwent minor clean up/refresh at my shop globe motorcycles limited. I used a full set of “NOS” body work so very hard to find i only have 2 full sets left. I swaped out the engine side covers with “NOS” units and new OEM gaskets and seals.

I have had this bike for several years and it has been the elr that i ride. She looks and rides as good as she did back in 1983.

The engine:
Serial number kzt00je041780 the engine is the original that came with the bike. I get asked this question all the time, why are’nt the ELR engine numbers ever close or similar to the frame numbers? The engine numbers have a specific range they must fall into for 1982 and 1983 kz1000r’s. This is the engine that came with the bike when she was new and is in the correct serial number range for a late 1983 elr.

With only 1789 miles it the engine ran great when i got her but i opted for her to run a bit better since i wanted to ride her. I installed a new hd clutch, all new OEM seals, pushrod, and gaskets (its just what i do). The engine itself has never been painted so no paint whent where it does not belong. The engine side covers were replaced with “NOS” units, very hard to find.

The carburetors were completely disassembled ultrasonically cleaned, and painted just as the factory did, resembled and synchronized. I re-jetted them with #132 main jets and raised the jet neddle with one washer to aid in running better with the competition baffle.

The frame:

The frame and swing arm are all original paint and look better then any of the other original elr’s i have had.
The tires have been replace with Dunlop k400’s (k300’s are not available). The grips, levers, mirrors, , end caps are all “NOS”.
The seat is all original with no blemishes.

The Kerker KR exhaust is the original unit that i had re coated to the original kal*gard finish and installed with OEM copper gaskets. The Kerker side emblem, the hanger bracket/bushing assembly, and the large competition baffle are all NOS ($500). The fuel tank, petcock, fuel guage sender, fuel cap, side covers, front cowl, rear cowl, front fender, tail light, wind shield and rubber seal, emblems, and associated hardware are all “NOS over $7500 worth of unobtainium. A modest amount of NOS/OEM hardware was used.

Tell your wife this is a great investment that will only go up in value unlike her shoe and handbag collection :). So here is your chance to own the best example of 1 of the 750ish 1983 Kawasaki kz1000r Eddie Lawson superbike replica’s ever built for north America. It is as close to when it came out of the crate with the exception of the Dunlop k400 tires and a very small amount of patina on the wheels. I will refinish the wheels to exact OEM specs for the new caretaker at my cost if he or she prefers “NOS” looking wheels (a very expensive process). I will for sure cry when it sells but i am blessed to have a few more ELR’s.

I have owned more then 20 ELR ‘s in the 15 years and have the largest inventory of ELR parts so bid with confidence. This bike will not disappoint. Please feel free to contact me with any questions 954-816-0806 Bob. Please come see her first if you have any doubts. I have been riding, racing, fixing, restoring, and collecting special bikes since graduating from American motorcycle institute “AMI” in Daytona beach Florida.

This ELR belongs in a museum so don’t miss out. I restored and preserved more bikes then i can count and have satisfied owners around the world with giant smiles on there faces every time they look at what the bought. The last 2 ELR s i sold (a 1982 and a 1983) went to Japan. They both had NOS body parts on all original bikes with low miles and sold for $28,500 and $36,000 and just not a perfect as this one.

The original tool kit, owners manual, and 2 keys come with the bike. The first buyer to hit the buy from the 2 ELR’s i have for sale will get my autographed custom painted 1983 bell helmet. The second one will end up with a custom painted 1983ish bell helmet that we will have to send to Eddie and wait for him to sign it.

Lets keep e-bay a great place to do business and only bid if you are planning to buy it.

$1000 deposit and the balance within 3 business days in cash or bank wire. I can store the bike for a few months and help arrange shipping

With ELRs getting rarer by the day, and NOS bodywork essentially unobtanium, we imagine it would be impossible to find another one like this. It’s a collector’s dream and an absolute museum piece. 

Featured Listing: 1983 Kawasaki KZ1000R Eddie Lawson Replica
Ducati February 5, 2020 posted by

Star-spangled Duc: 2002 Ducati 998S Ben Bostrom Edition

Ducati went all in on special editions in 2003 after Troy Bayliss took home the metal in the 2001 World Superbike Championship and American teammate Ben Bostrom followed him to third. They kicked out a special edition 2002 Ducati 998S for each man, wearing special carbon fairing pieces, Ohlins suspension, colored chromoly frames and Marchesini wheels, among other little tweaks.

2002 Ducati 998S for sale on eBay

Bayliss certainly had more to celebrate, but Ducati knew American riders would eat up a Star-Spangled Banner-adorned 998, and at the time they did not shy away from the opportunity to build a special edition. Aside from the paint and carbon bodywork, there wasn’t much to the Bostrom Edition that you couldn’t find on a 998R. The Tetrastretta v-twin kicked out close to 130 horsepower, the suspension was blue-chip stuff and the Massimo Tamburini-penned looks were in full effect.

This one has its share of knocks and bruises, especially for such a low mileage and rare bike, but overall it presents nicely. It wears what appear to be aftermarket rearsets and Termignoni cans.

From the eBay listing:

2002 998s Ducati Bostrom out of my little collection

-5726 miles
-Brand new tires
-Great condition but doesn’t have some blemishes. Please see the pictures and ask any questions you may have. The right side mirror has a rub mark, left fairing has a hairline crack, tail has slight spider webbing above “Superbike” and a little crack on the inside of the right fairing. All of these appear to be from bumps and none from the bike falling.
-Two piece side fairings, carbon belly, carbon under tray.
-This bike has several added carbon parts as well as other bits to add to the appearance.
-I am an avid fan of Ducati and added this Bostrom to my collection about three years ago. I have since found one with much lower miles and since I display my bikes, I bought the lower mileage and am now selling this one.
-The pictured bike stand IS NOT INCKUDED in the sale-it is for my other Bostrom.
-Bike has a service to include belts being done prior to my purchase. I added less than two miles during my ownership. It stayed displayed in my second story “bike cave”. The tires have 100% tread and all the little nuns are still visible. The bike does start and runs. While displayed, I started it at least once a month.

The bike is now downstairs and you are welcomed to have it inspected prior to auction ending.

Bike is located in the Dallas, Texas area. I will make myself available for inspections and to meet with a shipper for transport to you. However, inspection and shipping costs are the responsibility of the buyer. I have had numerous cars and motorcycles shipped to me so I can help answer questions.

Whether you dig the paint scheme or not, there is no denying the desirability of 998s, as they were the swansong of the awesome 916 line. Add a little rarity and scarce mileage, and you get a bike that a collector will drool over.

Star-spangled Duc: 2002 Ducati 998S Ben Bostrom Edition
Bimota February 3, 2020 posted by

Shogun in an Italian suit: 2000 Bimota SB8R

Taking Italian suspension, style and bespoke build quality know-how and shoving it full of deadnuts-reliable and prodigious power from the other side of the Atlantic, or in this case the Pacific, is a time-honored tradition. In the ’60s, the likes of Bizzarrini and Iso executed the formula to devastating effect in cars. But Bimota ported the practice over to bikes with racing success to back it up.

2000 Bimota SB8R for sale on eBay

In this case, the Italians hung a handbuilt frame and handmade carbon fiber bodywork around a Suzuki TL1000R engine, then threw Paioli springy bits at it to give it Bimota’s signature refinement. Before they were done, Bimota tweaked the big v-twin to push out just south of 140 horsepower at the crank. The result was a piece of industrial art that was made for race tracks but was almost too pretty to ride in anger.

This one, located at Speedart in Miami, Florida, has covered just 5,100 miles, and has been kept the way you’d expect for a collector’s piece of this caliber. There isn’t a surface on it that you’d be scared to eat off of. This one has a Power Commander III that was added by the second owner, which after a tune settled down some of the fueling issues these bikes can have thanks to those massive throttle bodies. It also wears a very stylish Arrow exhaust.

From the eBay listing:

Vehicle Description
Chassis No: ZESSB8R02YR000013

Odometer: 5,105 Miles

Engine: 996cc Four Stroke, V-Twin 8-valve, Liquid Cooled DOHC

Transmission: 6-Speed Gearbox

Performance: 135 bhp @ 9,750 rpm / 77 lb-ft – 0-60 mph 3.1 sec / 170 mph

Exterior: Competition Red/White

Interior: N/A

About This Motorcycle
“The first thing you notice about the SB8R is the striking exotic looks, thanks to passionate Italian design, hand-built craftsmanship, and the advanced, for its time, use of carbon fibre.”

The name Bimota is derived from the first two letters of the names of the three founders, Bianchi, Morri, and Tamburini.

Massimo Tamburini crashed his Honda 750 at the Misano race course in 1972, breaking three ribs. Finding himself with time on his hands while recovering, he designed and constructed a tubular steel frame that would eliminate the flex and handling problems that plagued the high horsepower machines of all the large Japanese manufacturers. Bimota’s first model, the HB1, was the result of his work and vision.

Only ten of them were produced, starting when the company was formed in 1973. In the early years Bimota produced mainly racing frames, then began manufacturing complete high performance machines as well as ones in “kit” form. When the now legendary KB1 was developed, the company was assured of commercial success. Bimota continued to be at the very leading edge of extremely high performance motorcycle design throughout the 80’s, 90’s and into the new millennia on both the track and the street.

Now more than forty five years after the firm’s founding, Bimotas of any era are sought after throughout the world because of their beauty, technological superiority and exclusivity.

The SB8R was the first production bike to use carbon fibre in the frame. There is plenty more additional carbon fibre elements, including the unusual but effective air intake system integrated into the front fairing, tail assembly and more. Bimota used engines from other manufacturers and constructed their own frame and body work to give it less weight and improved handling over the “donor bike”.

The Bimota SB8R uses a Suzuki TL-1000 motor, with Bimota’s own fuel and exhuast system that resulted in 135 hp. The motor and special designed rear suspension give the bike perfect balance resulting in a machine that is a joy to ride.

Even though the SB8R was designed for the track, most owners (true in the case of this motorbike), used them sparingly, riding on nice days, and the occasional bike show. This Bimota has only 5,100 miles after 16 years of ownership.

From the total of 150 hand-built examples spanning a two year period only 69 SB8Rs were exported into the US. It is questionable of how many are still in this pristine and original condition. Upon a closer examination it is easy to attest to the claims that it’s never been tipped over or any evidence of track time.

Speedart Motorsports is pleased to present this time capsule original SB8R in the configuration it left the factory in Rimini with a couple of small modifications in order to improve the ownership experience.

The light switch was modified so the headlight can be turned off, foot-pegs were replaced with European fixed position pegs, and the fueling system was modified to make it more rideable in street configuration.The fairings have original paint, carbon fiber parts have no cracks, all lights, turn-signals are original and working, tires have little wear, although they are at least 2 years old, so may want to consider replacing.Shocks don’t show signs of needing seals, engine has no leaks, runs great, once it warms up (these are cold-blooded beasts). Brakes have plenty of wear left, recommend oil change for the engine, something I intended to do, but haven’t made time.

This bike was purchased new from Ducati Bellevue on 3/2/2002. The 1st owner was a local Seattle aerospace engineer who rarely rode the bike. The last owner purchased the bike on 2015 prior to Speedart Motorsports acquiring the Bimota.

The 1st owner made only one modification to this machine. His one mod was having a custom fuel trimmer or potentiometer made to work with the existing wiring harness. These bikes were known to have fueling issues due to the massive throttle bodies and this is where the potentiometer helps out. Unfortunately the potentiometer is old technology and the adjustment range was limited. The second owner installed a PCIII that was tuned by Nels at 2 Wheel Dyno Works in Woodinville, WA.

PCIII was installed by second owner to permanently wash out some of the fueling issues that was typical of the SB8R model and its huge throttle bodies. This bike accelerates easier through the rev range than before. The fuel trimmer that had been installed by the first owner was only finite and could not adjust or reach some of these issues in the rev range. This modification alone makes it rideable even in heavy traffic.

As previously mentioned, the first owner added an out-of-production Evoluzione SB8R fuel trimmer provided by a Bimota enthusiast in Colorado. This unit is more precisely calibrated with nearly infinite settings between 0 and 999. The Bimota trimmer has 8 positions total.

The Arrow exhaust on the bike has been cored for better performance and sound. The result is outstanding in that it essentially replicates full racing pipes with much better performance and sound.

The stock tank on these SB8R’s is an Acerbis tank. The tank that’s currently installed on the bike was sealed and lined by Russ Foy in late 2014 to prevent any tank expansion. Furthermore braided steel clutch and brake lines were fitted in lieu of the stock rubber.

The sale of this race bred super bike is accompanied by owner manuals, service books and two keys.

The fortunate new owner will receive a galore of unobtainium spare parts worth thousands of dollars and who are no longer available. Such spares include, composite full fairing skins that can be painted with the desired livery suitable for racing, extra monoposto seat, additional OEM Acerbis Tank, OEM full exhaust system with silencers, lithium battery charger, rear pit stand and more, making this acquisition the ultimate SB8R package.

Disclaimer
Whilst Speedart Motorsports, LLC. (“We”) make a sincere effort to contain information that is accurate and complete, we are aware that errors and omissions may occur. We are not able therefore, to guarantee the accuracy of that information and we do not accept liability for loss or damage arising from misleading information or for any reliance on which you may place on the information contained in this website. We highly recommend that you examine the vehicle to check the accuracy of the information supplied. If you have any queries with regard to any information on our website, please contact us at . This disclaimer does not affect your statutory rights.

The buy-it-now for this beast is set at $23,000, and there are just a couple days left on the listing. With few owners in its history and one very carefully done modification, this thing is ready to make its third owner very happy.

Shogun in an Italian suit: 2000 Bimota SB8R
Ducati January 23, 2020 posted by

Featured Listing: 1988 Ducati Paso 750

This Featured Listing is part of the The Edinger Ducati Collection. Thank you for supporting the site, David! -dc

That Ducati Paso 750s don’t get the pure adulation that they deserve from anyone outside dyed-in-the-wool Ducatisti is baffling. Sure, they’re looks might aptly be described as controversial and they never had world-beating power, but their place in motorcycling is as important as any mid-80’s Japanese rocket.

Most importantly, the bike saved Ducati from the scrapyard of history, pulling together the earliest versions of the brand’s modern hallmarks under new corporate ownership. Second, however controversial it might have been, their styling is uniquely Italian, uniquely 1980s and at the time was from outer space. The man who penned it, Massimo Tamburini, went on to give the world the Ducati 916 and the Ducati Monster.

So, it’s safe to say without the oddly charming Paso, with its belt-driven cam engine and fiberglass fetish, the Ducatis we drool over now might never have appeared. If we’ve piqued your interest, this 1988 Ducati Paso 750 is the pick of the litter.

With fewer than 1,500 miles on the dial since new, and wearing the rare-as-frog-hair blue bodywork, this Paso rightfully should end up in a museum. According to the seller, it’s one of just 55 sold in this color scheme worldwide.

From the seller:

This blue model Paso is very limited in numbers with only 55 sold worldwide and only has 1,486 miles which allows you to have a brand new antique. The Ducati Paso 750 was the first road going product to come out of the Cagiva-Ducati relationship, launched in 1985 when Cagiva purchased Ducati from the Italian government. Cagiva rushed to get it ready for the 1985 Milan motorcycle show. The bike has a set of Conti slip ons however the stock exhausts come with the sale of the motorcycle. This is a very comfortable bike for both the rider and the passenger.

Between 1986 and 1988, Ducati only sold 4,863 Paso 750s. It’s important because it was the first Ducati product designed by Massimo Tamburini, co-founder of Bimota, and the man who would go on to design the Ducati 916, and the MV Agusta F4, both considered to be two of the world’s most beautiful modern motorcycles.

For the Paso 750, Tamburini cloaked the entire motorcycle behind fiberglass and plastic panels, hiding all the mechanical parts. For the time, the Paso was packed with state-of-the-art features: square chromoly steel tube perimeter chassis, an aluminum rear swing arm, and aluminum Marvic 16-inch wheels wrapped in radial tires.

The Paso 750’s calling card was in the parts department. The 42mm anti-dive front forks were pretty huge for the era, and there was a stout fork brace built right into the front fender. At the rear, the rising-rate “Pro-Link”-style Ohlins monoshock was adjustable for preload, compression and rebound damping.

It is equipped with the belt-drive Pantah motor which was a strong and capable engine, and known to deliver in the Ducati 750 F1.

The bike’s instruments were nestled in a binnacle that on normal machines would be covered by a tinted plexiglass windscreen, but on the Paso was an extension of the bodywork. They were made up of equal-sized speedometer and tachometer, along with a fuel gauge.

The Paso was lauded as “the best-equipped Eurobike ever to take on the Japanese in the hotly contested 750 sports market.” Owning a Paso today is something of a labor of love. They’re also mechanically reliable. The carburetor–an automotive Weber two-barrel pressed into duty running both cylinders.

The Paso is a fun, unique, and totally ’80s ride for not a lot of cash. Riding one never fails to elicit a thumbs up, and an appreciative glance from the crowd at your local European bike night.

Top Speed is 131 MPH with 72 HP@7,000 RPM and with a dry weight of 429 pounds with a 5 speed transmission, 5.8 gallon fuel capacity and a 30.6 inch height seat

Contact: David Edinger
Edinger.david@gmail.com
+1-317-908-2573

For all that beauty and rarity, our buddy David is asking for just $5,500. That’s half what you’d pay for a grey market Japanese two stroke, and this one is twice as clean as most smokers you’ll come across.

Featured Listing: 1988 Ducati Paso 750
Kawasaki January 23, 2020 posted by

Ride and cherish: 1983 Kawasaki KZ1000R ELR

The 1983 Kawasaki KZ1000R ELR is the ultimate expression of streetbike muscle from the era when racebikes actually were just tricked out street bikes with hot engine kits, big brakes and slicks. Without someone like Pops Yoshimura in your rolodex, you still weren’t gonna get close to Eddie Lawson’s horsepower numbers, but with a couple number plates and a decent imagination you wouldn’t be far off.

1983 Kawasaki KZ1000R ELR for sale on eBay

The 1983 Kawasaki KZ1000R ELR was the company’s marketing play on Eddie’s 1981 and 1982 AMA Superbike championships aboard a very green KZ1000. With bodywork from the previous year’s GPz, a warmed up engine and the hallmark bright green and blue bodywork over gold wheels, the look was perfect. The bikes were always meant to be a little extra special, so they sold few of them and the ones that remain are blue-chip collector bikes.

This one is a Canada-spec machine, with no smog equipment and a kilometers per hour speedo. It shows some wear and tear from its 37 years, but it feels nitpicky to mention them. With just under 11,000 kilometers on the dial, this thing has a lot of cruise nights left in it.

From the eBay listing:

1983 Kawasaki KZ1000R ELR (Canada / Europe spec) This model does not have engine head cover US emission valve as can be seen in photo. Speedometer in Kilometers. Very rare and hard to find period FOX race shocks. Bike is in very good condition with 6822 miles or 10979 Kilometers on the bike. 150PSI plus on all cylinder compression and valves adjusted. Repacked steering head bearings, new petcock seals, rebuilt front forks with seals and 20W fork oil. Good condition and painted side covers with decals and emblems as hard side cover grommets damaged the tabs on the side covers. Bike has new side cover grommets now. Owners manual and partial tool kit as can be seen in photo. Bike runs and have video of bike running . Shifts through all gears and no clutch issues. Brakes work as they should. All lights work. New Metzeler Sportec Klassik tires front and rear. New Yuasa battery.
Clear title in hand.

This  bike is very clean and original, but not so gleaming that you’d feel bad about riding it, which we love. For someone out there, this bike is the perfect addition.

 

Ride and cherish: 1983 Kawasaki KZ1000R ELR
Honda January 2, 2020 posted by

Featured Listing: 2005 Honda RC51 SP2

Update 6.17.2020: This bike has SOLD! Congratulations to buyer and seller! -dc

The Honda RC51 got right to the point when it came out, knocking Ducati and the other Japanese brands off their seats at the top of the World Superbike grid beneath future MotoGP star Colin Edwards. To do it, they had taken a page from the Italians’ book, relying on rules that let v-twins have 1,000ccs to take it to the 916 and 998. It won the title again in 2002, and accomplished the same feat in AMA Superbike with the peerless Nicky Hayden.

The RC51 did it all with reliability, aplomb and majestic build quality — the only way Honda knows. It was a death blow to Suzuki’s wayward TL1000R, which never really hit its stride as either a street or race bike, and it showed the Italians that mechanical sex can also be totally reliable. The critical numbers from the throaty, snarling v-twin are: 130-ish horsepower at the crank, and the better part of 165 mph on the big end.

This 2005 Honda RC51 looks incredible, wearing the pretty charcoal fairings of the later bikes, and blessed with the SP2’s updated fueling system, which nixed spotty low-end fuel delivery from the SP1 machines. It has done just 5,750 miles, and wears a Sato titanium exhaust system and a custom-tuned Power Commander.

From the seller:

The RC is #189 and tastefully modified with all original equipment mint and in my possession. The bike has under 5,743 miles and has less than 1,300 miles on the latest Q3+ Dunlop’s. Sato Banzai titanium exhaust, Kyle Racing tuned power commander and tail tuck kit.

Also included: I have both front and rear stands and two OEM oil changes also a fresh set of OEM air filters in the box all
HONDA authentic. New and unworn matching Carbon fiber Bell Race Star RSD CHIEF and matching Honda Racing leather jacket.

The bike has never been down or repaired in any way. Spark plugs have been replaced at 4,000 miles. Meticulously maintained. I am the second owner. Have owned for last 1,750 miles. Bike is in top shelf working condition and needs nothing. Bike was built as is from zero miles. Has gear adjustment and speedo correction performed as well.

Featured Listing: 2005 Honda RC51 SP2
Ducati December 22, 2019 posted by

Just in time for Festivus: Two 2018 Ducati 1299 Panigale R Final Editions!

2018 Ducati Panigale 1299R Final Edition #461 for sale on eBay

2018 Ducati Panigale 1299R Final Edition #519 for sale on eBay

Scrambling for a last-second, money-is-no-object gift for two of your closest friends? Look no further! Even the colors are holiday-themed on this brace of 2018 Ducati 1299 Panigale R Final Editions. All joking aside, there isn’t much time left to jump on these two, and they’d make a hell of a lot cooler gift than a Mercedes with a bow on the hood.

More than just a pretty paintjob, the 2018 Ducati Panigale 1299R Final Edition carried the most advanced v-twin Bologna ever spat out, which was fitting as it signaled the end of Ducati’s development of its most famous asset. With bigger vales, 13.1:1 compression, titanium connecting rods and electronics that would embarrass NASA, the FE managed 209 horsepower and 104 lb-ft of torque. The new fours may be more powerful in their ultimate form, but they’re cheating with more pots. This truly will go down as one of the engines of the century.

There were scant options available, as the bikes came with every box you could check as standard. That means electronic Ohlins suspension front and rear, top-whack Brembos and a full titanium Akrapovic exhaust system. Wet weight, with almost a full tank of gas, was 419 pounds.

As you might expect, there’s little fault to find with either of these two examples. Numbers 461 and 519 of 1,299 produced, they have only done 610 and 765 miles, respectively. Number 519 entirely as it left Bologna, and is listed slightly lower than 461. Number 461 has had its wheels powdercoated white and wears the optional Akrapovic titanium racing exhaust. They’re both rolling on their stock Pirelli Diablos.

From the seller:

2018 Ducati Panigale 1299R Tri-Colore

Final Edition

Number 461 of 1,299

1 owner motorcycle in pristine condition with only 610 miles. 1st service and safety inspection just completed.

Options include factory upgraded Akrapovic racing exhaust with up-map and carbon fiber belly pan. Factory lightweight Marchesini forged alloys professionally powder coated in gloss white with new bearings and seals installed.

This brings the original MSRP with upgrades to $46,560.00

Ducati celebrates the twin cylinder engine that marked the history of the Superbike World Championship. From Marco Lucchinelli’s first victory with the 851 in 1988 at the first race in the history of the World Superbike Championship, to 2017 with the victories of Chaz Davies and Marco Melandri on the Panigale R, the twin cylinder from Borgo Panigale has always been a top performer of the Superbike Championship. Unmistakable design and uncompromising technical choices like the Superquadro engine with a record 116 mm bore. 209 hp of pure adrenaline and 142 Nm of breathtaking torque. Cutting-edge electronics with Bosch Inertial Platform to guarantee maximum control.1299 Panigale: The object of desire of every motorcycle enthusiast.

Please feel free to contact me with any questions or call (919) 834-5111 and ask for Steve or Greg at Garcia Moto in Raleigh.

Original MSRP: $39,900.00

Upgraded race exhaust with labor: $6,260.00

Powder coated alloys: $400.00

Total order: $46,560.00

2018 Ducati Panigale 1299R Tri-Colore

Final Edition

Number 519 of 1,299

1 owner motorcycle with only 765 miles. 1st service and safety inspection just completed. Includes all books, extra unused key and additional $850.00 in OEM Ducati accessories listed below.

Ducati celebrates the twin cylinder engine that marked the history of the Superbike World Championship. From Marco Lucchinelli’s first victory with the 851 in 1988 at the first race in the history of the World Superbike Championship, to 2017 with the victories of Chaz Davies and Marco Melandri on the Panigale R, the twin cylinder from Borgo Panigale has always been a top performer of the Superbike Championship. Unmistakable design and uncompromising technical choices like the Superquadro engine with a record 116 mm bore. 209 hp of pure adrenaline and 142 Nm of breathtaking torque. Cutting-edge electronics with Bosch Inertial Platform to guarantee maximum control.1299 Panigale: The object of desire of every motorcycle enthusiast.

Please feel free to contact me with any questions or call (919) 834-5111 and ask for Steve or Greg for more information at Garcia Moto in Raleigh.

Original MSRP: $39,900.00

38520961A – Unused – DDA+ 16MB CONTROL UNIT: 380.62

97180241A – Unused – CLEAR OVERSIZED HEADLIGHT FAIRING – SBK: $200.10

97380371A – Unused – MIRROR HOLE COVER KIT: $150.00

69928571A – KIT CARICABATTERIA: $120.49

Total order – $40,751.00

More than likely, two lucky riders are headed for a wonderful treat next riding season, but we think it would be cool if these two were kept as a pair in someone’s very well-appointed garage.

Just in time for Festivus: Two 2018 Ducati 1299 Panigale R Final Editions!