Posts by tag: 1993 Moto Guzzi Daytona

Featured Listing November 7, 2018 posted by

Featured Listing: 1993 Moto Guzzi Daytona 1000

We are lucky at RSBFS to be helping to offer this gorgeous 1993 Moto Guzzi Daytona 1000 after a 15-year stay in a private collection. Though collection dwelling generally means a bike has sat long-term, this Goose shows 32,000 miles on the clock, which means it has been ridden and loved as much as it has been preserved.

The Moto Guzzi Daytona 1000 was not really built to win races itself, but to celebrate Guzzi’s victories in a spate of endurance contests in the 1980s, and to show off the Italian firm’s ability to engineer and execute a jewel of a motorcycle from somewhat unlikely sources. The bike was designed by dentist-turned-privateer racer John Wittner, and was powered by a very tweaked version of Guzzi’s enormous longitudinal high-cam v-twin. Tweaks included bigger jugs and a longer stroke, which helped the mill push out 95 horses.

From the seller:

1993 Moto Guzzi Daytona 1000 $14,995 (32K miles)

First time ever offered via the web, this has been in a private collection for the past 15 plus years, never seen rain. Custom rear cowl and paint scheme, the wheels have been redone in gold to match. Stunning spotless example of this Italian beast, Termignoni Carbon pipes makes great deep thumper noise from the motor and fuel injection tubes.
MG Daytona 1000
Claimed power: 95hp @ 8,000rpm
Top speed: 145mph
Engine: 992cc air-cooled high-cam 8-valve 90-degree V-twin
Weight: 451lb (dry)

After his team of modified Moto Guzzis won the 1984 and 1985 U.S. Endurance Championship and the 1987 Pro Twins series, U.S. Moto Guzzi guru Dr. John Wittner was made an offer he couldn’t refuse. Summoned to Italy by Guzzi godfather Alejandro de Tomaso, Wittner, a former dentist turned endurance racer, was asked to help develop a new world-beating superbike. Guzzi revealed a prototype at the 1989 Milan show and named it for the famous Florida circuit (where they won the 250-mile endurance race in 1985), but in typical Italian fashion it took until late 1991 for the Daytona to go into production.
Although the hot rod Daytona engine was based around the classic “big block” air-cooled Moto Guzzi transverse V-twin, in the end it retained only the crankshaft and crankcases of the standard engine. Using the 78mm stroke of the 948cc Le Mans 1000 combined with new plated alloy cylinders with a 90mm bore, it displaced 992cc. A bright red sport fairing melded into the gas tank just above the Daytona’s all-new cylinder heads, grandly marked “OHC 4V” for overhead camshaft 4-valve. In truth, the cams were carried high in the cylinder heads, not on top, so the engine could also be considered a high-cam design overhead valve.
From the crankshaft, a reduction gear train drove a pair of toothed belts, each spinning a single camshaft in each cylinder head, which in turn opened four valves via short pushrods operating rocker shafts. Fueling was by Weber-Marelli electronic injection, and the exhaust system was in stainless steel. The engine drove a revised version of the 5-speed transmission used on most Guzzi twins through a beefed-up clutch (with 10 springs versus eight) and a driveshaft to the rear wheel.

The powertrain hung from a new spine frame based on Dr. John’s race bike design, constructed from 1.5mm chrome-moly tubing with a cantilevered rear swingarm and a fully adjustable Koni (later WP) monoshock under the seat. Marzocchi supplied the “conventional” three-way adjustable fork, and Brembo four-pot calipers with 300mm dual discs (two-pot/260mm rear) provided stopping power. Cast alloy 17-inch wheels ran on 120-section front and 160-section rear tires.

With a claimed 95 horsepower available at 8,000rpm, the Daytona was the most powerful road-going Guzzi to date, returning a top speed of 145mph. “The result is excellent rideability, with big-time low-end and midrange power available whenever you open the throttle,” Cycle World said of the big twin in 1993. On the road, they found that being long and low in Guzzi tradition gave the Daytona reassuring stability at high speeds: “The Daytona proved unflappable, with well-damped suspension, plenty of cornering clearance, premium tires and a relatively flickable yet very stable nature.” You will not see another one anytime soon. Be different and add this thumper to your collection. This investment will only increase over time.

Contact the seller here: sennaducati79@gmail.com

Though the performance is more than enough for mortals, the Daytona 1000’s real claim to fame is its scarcity, build quality and looks. It is a true gentleman’s road racer, made more for comfortable canyon carving than dicing at the sharp end of a club race. The previous owners of this machine clearly took that mandate to heart, given the beast the exercise it deserves.

Despite its mileage, the thing looks absolutely mint, with nary a blemish, nick or streak of grime. The rear cowl wears custom livery, and the wheels have been painted gold to match the accents. That might deter the hardest-core originality freaks, but we love the look. With pedigree, acres of charm and tons of special bits, this thing is not to be missed at $14,995. Contact the seller here: sennaducati79@gmail.com

Featured Listing: 1993 Moto Guzzi Daytona 1000
Moto Guzzi January 14, 2015 posted by

Guzzi Racers: Moto Guzzi MGS-01 in Japan vs Moto Guzzi Daytona in US

guzzi2

guzzidaytona12

As we have posted before, Moto Guzzi is the oldest European manufacturer in continuous motorcycle production and has over 1000 racing victories including 14 world speed titles.  However most of the Moto Guzzi victories came well over 40 years ago.  Guzzi has made the occasional attempt to recognize and even revisit their racing history and this post is about two of these efforts, a 1993 Guzzi Daytona available in the US and an uber-rare 2004 MGS-01 for sale in Japan.

guzzidaytona13

1993 Moto Guzzi Daytona for sale on ebay

First is a 1993 Guzzi Daytona located in the states. We have posted a few of these here on RSBFS but for those unfamiliar with the Daytona edition, in the mid 1980's an American named Dr John Wittner decided to try something different and go racing using a Moto Guzzi.  Witnner's Guzzi efforts resulted in wins in both the 1984 and 1985 U.S. Endurance Championship and Wittner eventually went to Italy to work for Moto Guzzi.  One result of his efforts was the Guzzi Daytona edition, which had an updated engine that was in a new spine frame based on Dr. John’s race bike design, including a monoshock under the seat and Brembo four-pot calipers with 300mm dual discs (two-pot/260mm rear) provided stopping power.  The result was a significantly improved ride over other Guzzis of the era, with power available whenever you open the throttle.  A detailed explanation of all the technical changes in the bike can be read here.

While the Daytona was a big move forward for Guzzi, it was still essentially a big Guzzi, more of an homage to Wittner's Guzzi racing success than a pure racer.  As reviewers noted;

The Moto Guzzi Daytona isn't a real race-replica, it is instead more of an homage, a traditionalist’s GT-class machine. It excels everywhere by not doing anything wrong; the suspension offers a good balance of compliance and control. Mid-corner throttle changes have almost no consequence whatsoever on the chassis. Whacking open the throttle while leaned over makes the rear end squat slightly, just like a chain-drive bike which is amazing considering the shaft drive.

guzzidaytona15

The buyer includes a fair amount of info about the bike, including the following:

  • Single owner since new
  • Everything on the bike is stock including the Stage 2 Moto Guzzi upgrade kit.
  • The original tires were on the bike, but were just replaced out of safety concerns.
  • All of the fluids have been just changed by the owner and a new battery installed.
  • Mileage is listed at a low 7,126 kilometers/4,427 miles

Overall the condition looks to be very good except for some surface rust on the rear rotor which is probably due to climate and what appears to be an aftermarket exhaust.  It is interesting to note that like other US buyers of the Daytona, the buyer wasn't happy with DOT mandated changes and had the dealer convert the headlight to the European specs which included the head light assembly and upper fairing.

guzzidaytona14 guzzidaytona16

Okay, now usually in these posts this is where I post the "so whats it worth part?"  The Daytona isn't a bad bike in any way, is always popular among people who like good engineering and want something that isn't a torture to ride.   Prices for these seem to vary between 8,000-11,000 USD depending on condition.  These bikes are known for retaining their value so if this one is on your bucket list, this might be the one for you.

But what if you wanted a true Guzzi race machine?  Well there was an actual short-lived effort by Moto Guzzi to produce a true race machine.  Moto Guzzi was acquired by the Aprilia motorcycle company in 1999 (Editors note: along with my beloved Laverda) and Aprilia was at this time working hard on large displacement bikes including their RSV Mille.  It was during this period that Moto Guzzi produced the uber-rare and non-street going MGS-01 pictured here.

guzzi 1

2004 Moto Guzzi MGS-01 for sale in Japan on goobike

The MGS-01 (Moto Guzzi Sport model number one) was intended to be the future of Moto Guzzi. It was fast, beautiful, exclusive, expensive, basically you typical piece of Italian exotica. A detailed explanation of the MGS-01 can be read here but to suffice to say that when bike was introduced it caused a sensation.  Sadly, only 150 of the MGS-01 managed to make it out the door before new owners of Aprilia the Piaggio group shut down production in 2005 to focus on more profitable ventures.  Efforts continue to keep the idea alive via the Millepercento group but those aren't official Guzzi products.

guzzi carbon

This particular MGS-01 is located in Japan and there is almost no info provided about the bike other than a few pictures.   Perhaps a RSBFS reader located in Japan could get more info for us.  Asking price of 42,000 USD is actually in line with the few that have been posted on RSBFS before. With only 150 of these being built and some undoubtedly being used as true race bikes, the chances of acquiring one of these will probably only decline going forward so serious collectors should take note.

In conclusion, while from a styling standpoint its hard to believe only 11 years separated the 1993 Daytona and the 1994 MGS-01, they are both modern motorcycles and each one has their own type of appeal.  I suppose the Daytona would be easier to own and enjoy while the MGS-01 is certainly a true piece of unobtanium.  Perhaps some lucky Moto Guzzi fan will be able to acquire them both and enjoy the Daytona as a regular ride and the MGS-01 as living room art.

-Marty

Guzzi Racers:  Moto Guzzi MGS-01 in Japan vs Moto Guzzi Daytona in US
Moto Guzzi December 4, 2012 posted by

For the Guzzi Faithful: 93 Daytona 1000

RSBFS enjoys an ever growing fan base but one of the most loyal segments is the Moto Guzzi riders that are subscribed just for bikes like this one. With just over 12k miles it's even been ridden a bit and in my mind encourages the next rider to do the same.

1993 Moto Guzzi Daytona 1000 For Sale on eBay

from the seller:

Early 1993 Moto Guzzi Daytona very nice original condition. She runs very good could use a new set of tires. All Guzzi Daytona's are rare with low production #s in the low 100's. This is especially true on the early white rim grey seat models models. This model is a very sound investment that will only continue to go up in value.

I will help with shipping if needed.

Starting bid is $8499 reserve not met and the auction wears a $10,200 buy-it-now with 6 days remaining. Somewhere in between sounds spot on based on our values database. Good luck to buyer and seller!

dc

Buell October 14, 2011 posted by

1989 Buell RR1200 and 1993 Moto Guzzi Daytona 1000 Available Now in Canada

Good morning! Please welcome our latest site sponsor, Kia West in Coquitlam, BC with two featured pieces currently in their inventory.

First up is this great looking and barely broken in 89 Buell RR1200 with just 152 miles!

The history of this RARE motorcycle is part of Harley-Davidson's success in Canada. Legendary enthusiast, racer and man behind the largest importer of Harley's in the world (Trev Deeley) brought this machine into Vancouver as one of only three ever to be imported into Canada. I am sure that Trev did all he could do to promote Buell, simply because of Buell's brilliance and innovation as a motorcycle racer. Stories of this RR1200 in the window of Deeley's east Broadway motorcycle shop are consistent...so many traffic rear-enders distracted by the Buell in the window...the machine was removed from it's display. From the spot light to the warehouse; that's where the RR1200 sat for some time. One of Trev's racing pals eventually purchased the RR1200 and moved it into his private collection. Never registered. 152 miles of demo. Sales brochure and original price tag included. Serviced and ready to show or vintage track.

Read our writeup on this Buell RR1200 Battletwin from May.


And this 93 Moto Guzzi Daytona with just 7141 miles on the clock:

Moto Guzzi is a genuine Italian motorcyle manufacturer. It is one of seven brands currently owned by Piaggo. Initially established in 1921 in Mandello del Lario, Italy. The company was noted for its historic prominence in world wide racing. In addition to a series of industry innovations, including the first motorcycle wind tunnel. What we have here is a unique and very, very rare opportunity. You have the chance to acquire one of these limited production machines. This is number 13 of 34 brought into the US.

Read our writeup on this 93 Moto Guzzi Daytona from July.

Many thanks to Kia West for helping to support Rare SportBikes For Sale!

-dc