Update 5.4.2014: This bike is now sold. Congratulations to buyer and seller! -dc
Update 5.3.2014: Price reduced to $5750 from $6500 firm. -dc

Today’s Featured Listing is this enthusiast owned, and thoughtfully improved, 1995 Ducati 916 Monoposto. It has 17.5k miles and from the seller’s description, was ridden as it was intended in the hills and at the occasional track day. Since this wasn’t a living room display piece it’s entire life, the owner upgraded several components to make the experience all the better and more reliable (many stock parts included as well). It has a couple of minor marks but overall looks well cared for, and with the Arrow pipes it will sound the part as well. The seller has priced this bike for just $6500 firm.

We’d like to thank Ruben for supporting the site with a Featured Listing and good luck with the sale!
dc

from the seller:
I purchased the bike from El Cajon Ducati in 10/95. The VIN is ZDM1SB8S8SB004812, which makes it a Bologna produced unit. It has 17.5k miles now. The majority of the miles went on the bike in the first 6 years I owned it. There was a period from ’03 to ’11 that I was focused on roadracing, supermoto racing, and off road riding, during which I stopped street riding completely and filed non-op status with DMV on the bike. It was mostly stored as a display piece in my office during that time, except for pulling it out for occasional track days or bike shows. In June/11, I took it out of the office, gave it a mechanical refreshing and put it back on the road. It’s done a few thousand miles since then.
It’s always been garaged and well maintained, and is in very well preserved condition. It was mostly used for day trips to the canyons, but I also did a few casual track days with it. It has never been crashed or damaged, other than tipping it over while stationary in a parking lot once about 12 years ago. That resulted in a few scratches on the right side fairing, and the right side mirror broke. I decided not to repair or replace the fairing panel, because the scratches are small and didn’t really bother me, and I wanted to keep the paint original. You can see the scratches in the detailed photos. Overall, the cosmetic condition is very clean.
Here is an album with a bunch of photos: http://s439.photobucket.com/user/Archilla_photos/library/916
The photos are all high res. When you view each one, you can click on the bottom right corner of the photo to zoom to the original image size to see in serious detail. You’ll be able to see any and all scratches.
I’ve got records back to when I bought it documenting service (done by myself or the dealer), warranty work, and the rear spindle recall. I have detailed notes of the work I did when I took it out of storage and refreshed things 2 years ago. It currently has a set of Dunlop Q2s on it, which have been used for a track day last June at Laguna Seca (which is really mild on tires) and then a few hundred street miles after that, so they have a lot of life left in them. It is in great mechanical condition with no problems whatsoever, but it is due for a valve adjustment and timing belt change soon if the next owner plans on riding it rather than keeping it in a collection.
The bike is mostly original. Here is a complete list of everything that is not original, and why…
- Arrow Ti exhaust (1/2 system) and chip. The brackets on the stock exhaust started cracking at the welds in a few locations many years ago. Rather than get the stock ones re-welded, I used that as an opportunity to put on some lighter and better sounding silencers. I don’t have the original silencers any more (gave them to a friend for a 748 project he was working on).
- Goodridge kelvar brake/clutch lines. The motivation here was to improve front brake feel (rigidity) by switching to a dedicated 2 line set up (one line to each caliper). Also added a banjo bolt with a bleed nipple to allow bleeding at the master cylinder end of the lines. Not sure if I have the original lines.
- Yoyodyne titanium clutch slave cylinder. The stock one failed about 10 years ago, which is pretty common. Fitting a better aftermarket slave cylinder is the typical solution.
- Cycle Cat titanium clutch cover. Vented covers help the clutch run a bit cooler, and of course they liberate the unique dry clutch sound. I still have the original cover.
- CDT carbon fiber rear hugger. The rear shock is completely unprotected from stones coming off the rear tire as original. For years I just had a shock guard on the bike, but recently added the rear hugger because it looks nicer.
- Rear fender removed. I relocated the plate to fit between the exhaust tips, and mounted some turn signals behind the rear facing screens on the tail section. I still have the original parts.
- Front signals removed, and changed to aftermarket mirrors with integrated LED signals. After breaking the right side mirror when I tipped it over in the parking lot, I was able to get a pair of these mirrors for less than the price of replacing just the broken right mirror with the OEM part. I still have the OEM left mirror and signals.
- Pipercross air filters installed. The original OEM foam filters eventually deteriorate into dust and need replacing.
- Added a digital voltmeter, wired to the battery and switched. The charging systems on the 916 were not the best, and keeping an eye on the charge voltage is a good way to notice any problems before it is too late. Other than the normal problem of the wiring from the alternator to the voltage regulator going bad (which I replaced with high quality 10 guage Teflon insulated wire), and the also normal problem of the original voltage regulator failing many years ago (which was replaced under warranty by the dealer), I’ve not had problems with the charging system. The voltmeter is wired directly to the battery with no spliced wires, so could be easily removed.
- Shorai LiFe battery installed. Once the 3rd stock lead acid battery was dying, I decided to go with a lithium battery, which weighs a fraction of the stock battery, is much smaller, and has a very slow self discharge rate (compared to a stock battery) which works better for how infrequently I ride it. I’ve since put these batteries in most of my other bikes.
- Oil cooler screen.
- Carbon fiber key guard.
- Ohlins adjustable steering damper added. I did this before taking it to the track. I still have the original non-adjustable damper somewhere. The stock damper doesn’t do much really.
- 14 tooth countershaft sprocket. These bikes are geared too tall from the factory for street riding. I probably have the original OEM sprocket somewhere.
I have a rear stand and a fitted Ducati Superbike dust cover that will go with it. It currently has a personalized registration, DSMO. Most Ducati owners are jealous of this. Of course you could transfer over that plate if you want, although as you can see in the photos, the plate is trimmed to fit between the exhaust tips, so if you went back to the stock rear fender setup, you’d want to get a new plate.









